Every Silverback TAC 41 Magazine Carrier will include x2 Male mounting screws, x2 Female Mounting Screws, x2 Rubber Mounting Spacers and either X1 Malice Clips for Molle mounting or X1 DCL Combat Loop for Belt mounting.
To remove or adjust the mount included with the carrier, simply open the mount, place one finger inside the carrier on the back of one of the female mounting screws and with a Phillips head screwdriver undo the male screw on the outside face of the carrier. If you are unable to apply enough pressure to the back of the female mounting screw inside the carrier, try putting a wide rubber band between your finger and the female mounting screw you’re trying to undo. The mount can also be mounted onto the carrier at up to a 20° angle by using the mounting holes either of the central mounting hole.
This Magazine Carrier uses an MRD (Magazine Retention Device) which provides adjustable retention to the back of the magazine, allowing the carrier to hold on to the magazine with the perfect amount of resistance. To adjust the retention on the Magazine Carriers you need to screw or unscrew the silver grub screw found on the side of the carrier with a 1/8” Allen key/hex key. Please note that the magazine can only be inserted into the Magazine carrier in one orientation.
Made from 2mm P1 Kydex T Thermoplastic
Wrapped in IR Compliant Genuine 500D Cordura (where applicable)
All Mounting screws will have threadlock pre-applied to stop them from backing out or coming loose over time
Left or right side mounting
Fits onto molle or up to 2” wide belts
Up to 20° forward or backward cant